5 ways to save energy and stay cool this summer
1. Close your blinds!
Closing your blinds in the summer reduces radiant heat from the sun entering your house or office.
Even if you close the blinds only during peak sun hours this trick will help decrease the amount of radiant heating caused by the summer sun.
2. Set the thermostat to 78 degrees
Air conditioners will run at their optimal performance level when set at 78 degrees. Making it even 5 degrees lower will result in your AC using up to 40% more energy. Keep that thermostat at 78 degrees during the day and turn it down at night, to conserve the most energy.
3. Use passive cooling techniques
To reduce the need to turn on the AC try out some passive cooling techniques.
Passive cooling techniques include but are not limited to planting trees or hedges, installing window awnings, the use of fans, and opening and closing windows and blinds at the appropriate times of day. For example you would open windows at night for the cool breeze and close them along with blinds during peak sun hours.
4. Upgrade your windows
Replacing old single-pane windows with new dual-pane ones that include Low-emissivity (Low-E). The Low-E coating reduces energy loss by as much as 50%, and as a bonus you could be eligible for tax credits for buying energy star rated windows.
5. Reduce your energy costs
Enroll with Realgy Energy Services to save on your natural gas and electricity
These simple tricks coupled with Realgy Energy Services low rates can drastically reduce your energy costs this summer.
Check out Realgy Energy Services rates and see how much you could be saving www.realgyenergyservices.com Or Call one of our Energy Brokers today 877-300-6747.
Sources:
U.S Department of Energy, Energy Savers, Thermostats and Control Systems
The Daily Green, Close Your Blinds to Beat the Heat
Earth 911, 9 Ways to Ready Your home For Summer
Houzz, Life Without Air Conditioning? These Passively Cooled Homes Say Yes
U.S Department of Energy, Energy Savers, Window Types
In Response to “Carbon Taxes Make Ireland Even Greener”
Written by Michael Vrtis, President of Realgy Energy Services in response to the New York Times article “Carbon Taxes Make Ireland Even Greener”
Should the potential to emit greenhouse gases and deposit garbage in a landfill cost more than non-air emitting energy production and recycling?
Most states have passed laws to limit or prohibit smoking indoors primarily to protect others from the effects of second-hand smoke. Taxes on cigarettes have also increased as a way to fund prevention and reimburse states for the cost of care for those who develop diseases.
Should energy and waste be different?
Individual consumer choices of cars, appliances, and transportation have a direct impact on the emissions produced. For instance, some cars produce 80% less emissions than others for nearly the same footprint. Encouraging recycling by charging more to throw something away may possibly create some opportunities in the recycling industry. That is; there will be more people thinking about how to actually use what people throw away instead of burying it or burning it.
Whether it’s called carbon tax or not, the idea of accounting for the whole impact of energy and individual purchases (be it human health or environmental,) should be considered. It is already costing everyone something and now the question is: should that cost be shifted to those who produce more emissions and garbage?
Ireland and many states and cities are trying something else.
Check out the New York Times article:“Carbon Taxes Make Ireland Even Greener”
Have you ever wondered just how that electricity got to your light bulb or microwave?
The electricity powering your light bulb is produced in a power plant by generators. Energy cannot be created or destroyed just changed from one form to another. Newly generated electricity is then transported over the power grid to your electrical outlet.
The United States has three power grids that keep the lower 48 states powered:
- The Eastern Interconnected System east of the Rocky Mountains
- The Western Interconnected System from the Pacific Ocean to the Rocky Mountains
- Texas Interconnected System
These three separate systems are interconnected and require constant oversight to ensure that all the components are linked together. Since large quantities of electricity cannot be stored effectively or efficiently, electricity must be produced as it is used, this increases the need to watch over the grid. Control centers are utilized to monitor the supply and demand to safeguard against blackouts. To avoid blackouts there must always be a perfect balance between supply and demand.
From the control centers electricity is constantly monitored as it travels from the power plants to high-voltage power lines that transport electricity throughout the three grids. The higher the voltage the more efficiently they transport electricity. In other words the higher the voltage the more electricity will get to the end point. However, there will always be losses as electricity flows through the power grid.
From the high voltage power lines the electricity is “stepped-down” to lower voltage power lines, utility poles and wires before it can be safely used in your home or office.
Do you know how much you are paying for the electricity you use?
Why not reduce your electricity rate with Realgy Energy Services. Give one of our Energy Brokers a call (877) 300-6747 or check out our website for more info www.realgyenergyservices.com
Source:
BoingBoing, Where electricity comes from
US Energy Information Administration, Energy In Brief, What is the electrical power grid, and what are some challenges it faces?