Working gas in storage was 3,733 Bcf as of Friday, October 9, 2015, according to EIA estimates. This represents a net increase of 100 Bcf from the previous week. Stocks were 447 Bcf higher than last year at this time and 168 Bcf above the 5-year average of 3,565 Bcf.

EIA estimates 91-95 Bcf

vs

Actual inject was 100 Bcf

An injection within expectations would be less than the 96-Bcf build reported at this time in 2014 but more than the 87-Bcf five-year average increase, according to EIA data. The wider range of analysts’ expectations for this week was for an injection of 77 Bcf to 104 Bcf. Last week, the EIA reported a 95-Bcf injection that increased inventories to 3.633 Tcf, which was 443 Bcf, or 13.9%, more than the year-ago inventory of 3.19 Tcf, and 155 Bcf, or 4.5%, more than the five-year average of 3.48 Tcf. “Demand picked up slightly, mostly due to increased heating load as temperatures are starting to decline on seasonal trends,” said Bentek Energy, a unit of Platts. “The increased heating demand was met with lower power burn demand. However, power-burn demand trended higher as the week progressed after starting … the week at relatively weak levels, and set a new single-day high for the month of October late in the storage week.” Greater demand decreased injection activity 24% week over week in the East Region, Bentek said. “This was partially offset by stronger injection activity within Bentek’s sample of facilities in both the Producing Region and the West,” Bentek said. FirstEnergy Capital analyst Martin King said that despite above-average temperatures during the reporting week, temperatures were cooler in the East, causing some “noticeable overnight heating loads.”

10 19 15 10 19 15 2