Why you should toss those old incandescent holiday lights
For most people the holidays mean time-honored traditions. But this year toss out some of those traditions by tossing out those old incandescent lights in favor of newer LEDs which consume less energy and cost even less to operate.
Older strings of incandescent lights can use up to 99% more energy than new LED light strings. In addition, LEDs are much cooler than their traditional incandescent counterparts, reducing the risk of combustion.
A string of new LED lights could last up to 40 seasons and since they are made with epoxy lenses instead of glass as are most traditional incandescent light strings, they are more resilient to damage.
As an extra bonus you can connect up to 25 strings of LED lights together end-to-end and not worry about overloading a wall socket.
If you are still not convinced that it is time to upgrade your holiday lights, check out these figures from energy.gov.
Estimated cost* of electricity to light a six-foot tree for 12 hours a day for 40 days
| Incandescent C-9 lights | $10.00 |
| LED C-9 lights | $0.27 |
| Incandescent Mini-lights | $2.74 |
| LED Mini-lights | $0.82 |
Estimated cost* of buying and operating lights for 10 holiday seasons
| Incandescent C-9 lights | $122.19 |
| LED C-9 lights | $17.99 |
| Incandescent Mini-lights | $55.62 |
| LED Mini-lights | $33.29 |
*Assumes 50 C-9 bulbs and 200 mini-lights per tree, with electricity at $0.119 per kilowatt-hour (kWh) (AEO 2012 Residential Average). Prices of lights based on quoted prices for low volume purchases from major home improvement retailers. All costs have been discounted at an annual rate of 5.6%. Life span assumed to be three seasons (1,500 hours) for non-LED lights.
Source:
Energy.gov, LED Lighting
What should you do during a Winter Storm?
The number one tip from ready.gov on winter weather and how to stay safe is to stay indoors during the storm! However this may not be possible or feasible, so if you must venture out during a winter storm please take these precautions:
Walk carefully on snowy, icy walkways.
Keep dry. Change wet clothing frequently to prevent a loss of body heat. Wet clothing loses all of its insulating value and transmits heat rapidly.
Watch for signs of frostbite. These include loss of feeling and white or pale appearance in extremities such as fingers, toes, ear lobes, and the tip of the nose. If symptoms of frostbite are detected, get medical help immediately.
Watch for signs of hypothermia. These include uncontrollable shivering, memory loss, disorientation, incoherence, slurred speech, drowsiness, and apparent exhaustion. If symptoms of hypothermia are detected, get the victim to a warm location, remove wet clothing, warm the center of the body first, and give warm, non-alcoholic beverages if the victim is conscious. Get medical help immediately.
Drive only if it is absolutely necessary. If you must drive, travel in the day—don’t travel alone, keep others informed of your schedule, stay on main roads, and avoid back road shortcuts.
Let someone know your destination, your route, and when you expect to arrive. If your car gets stuck along the way, help can be sent using your stated travel plans.
Source:
ready.gov, Winter Storms & Extreme Cold
Are you ready for the cold weather?
Now is the time to start winterizing your home. Here are a few tips brought to you by Realgy Energy Services to help you prepare for the colder weather and increase your energy efficiency.
Just like your air conditioner, your furnace should also get an annual check-up from a certified HVAC technician before the heating season. Keeping your furnace and ducts clean, lubricated and properly adjusted will reduce energy use and save you money.
At the very least, make sure to clean or replace the air filter on your furnace before starting it for the first time and check it every month. A dirty filter will restrict airflow and increase energy use and even possibly lead to premature failure of the unit.
While you are checking on your furnace, don’t overlook the hot water heater; if it is warm to the touch, it needs more insulation. Consider installing a water heater blanket or jacket insulation around the tank which will help prevent heat loss; be sure to leave the air intake vent uncovered. You should also insulate hot water pipes to further reduce heat loss.
Insulating your hot water heater and pipes will decrease your energy consumption and increase your savings; as a bonus this will even allow you to turn down the water temperature to around 110-120 degrees Fahrenheit.
If you have a fireplace always keep the damper closed when not in use to prevent heat loss. Ensure the chimney is clean and soot free; you should also cover the top of the chimney with a protective cap or screen to keep out unwanted debris and small animals.
Take the time now to seal cracks and crevices around windows and doors using caulk or weather-stripping. If you have old windows and are not planning on replacing them before the cold weather, consider using a shrink plastic kit to keep hot air in and cold air out.
Use these simple tips to get your home ready for the winter chill and increase your energy savings.
Sources:
EnergySavers.org, Stay Warm, Save Money
U.S. Department of Energy; Energy Efficiency and Renewable energy, Thermostats and Control Systems
Energy Star, Winter Energy Savers
Are you ready for the summer heat?
On top of our low competitive energy rates, Realgy Energy Services also provides our customers with even more ways to save money and energy. Here are some helpful tips towards lowering your utility bills this summer.
Take advantage of the sun and turn off the lights to enjoy the “day lighting”. If you must use the lights this summer, replace those used most often with CFL or LED bulbs. Incandescent lights give off more heat than the newer energy efficient models. If you replace one traditional 100W incandescent bulb with an Energy Star CFL light bulb you could save up to $6 a year in energy costs In just two years, these bulbs will pay for themselves.
Heating and cooling accounts for up to 40% of energy consumption in commercial buildings and almost 56% in residential buildings. Make sure your AC is equipped to run efficiently. If you have not already, schedule an AC tune up with a certified HVAC contractor. The contractor can point out and repair minor issues before they become huge problems and ensure it is running at its most efficient. You should plan to have your AC tuned up every two years, or every year if it is used frequently.
Air conditioners will run at their optimal performance level when set at 78 degrees. Making it even 5 degrees lower will result in your AC using up to 40% more energy. Keep that thermostat at 78 degrees during the day and turn it down at night, to conserve the most energy.
78 degrees is the magic number with ACs
Ceiling fans create a wind chill effect that will allow you to raise the thermostat about 4 degrees without any reduction in comfort. Just remember to turn off the fans if nobody is in the room.
Avoid using electronics or anything that generate lots of heat such as computers, ovens, even incandescent lighting. By reducing the amount of heat that is generated you can reduce the cost of cooling that area.
These simple tricks can drastically reduce your energy consumption and costs.
Sources:
U.S Department of Energy, Energy Savers, Thermostats and Control Systems
Edison Electric Institute, Energy-Efficient Tips and Products for Commercial Use
Spring Cleaning Tips to Increase Energy Efficiency
Spring cleaning usually involves making sure all the nooks and crannies are clean after the long winter months. This year why not use these helpful tips to increase the energy efficiency of your home or office. Not only will your energy usage decrease so will your energy bills!
Refrigerators account for up to eleven percent of the total energy used, which has a major impact on your energy bill. Make sure you clean the condenser coils to ensure that air can circulate freely, if dust builds up clogging the coils the motor must work harder and use more electricity. You should also check the door seals to ensure they are air tight. You can do this by placing a piece of paper in-between the door, if you can pull it out without difficulty you may need to adjust the latch or consider replacing the seals.
Don’t forget about your Air conditioner call to schedule a checkup to make sure it is operating at peak efficiency. If you have central air conditioning, keep your thermostat at 78 degrees. You can save approximately six to seven percent off your cooling costs for each degree above 78. If you are in the market to replace your old central air conditioner, make sure to look for a new ENERGY STAR qualified model. These energy-efficient models can reduce your cooling costs by 20 percent.
If you do not have an AC, proper ventilation of your home or office can provide the same level of comfort at a much lower cost. A whole house ventilation system will draw cool air through the house. Ceiling fans are another option to create a cool breeze and keep the air circulating in your home, ensure that all fans are working properly and are dust-free.
Last but not least, if your home or office has a sliding glass door, make sure to keep its track clean. A dirty track can ruin the door’s seal, resulting in gaps where cold air can escape.
Now that your home and or office is clean and energy-efficient, why not save even more money by checking out Realgy Energy Services low monthly rates on Natural Gas and Electricity. Our customers have saved upwards of 19% on their energy costs over a twelve month period as compared to their local utility. Check out our website www.RealgyEnergyServices.com, or call one of our Energy Brokers at (877) 300-6747 to learn how you can save on your energy usage.
Sources:
U.S. Department of Energy, Energy Efficiency & Renewable Energy, “Energy Savers Tips on Saving Money & Energy at Home”
Home Energy Team, “Energy Efficient Solutions”
Money Crashers “House Spring Cleaning Tips & Checklist – How to Spring Clean“
How to protect your natural gas and electric meter this winter
Outdoor natural gas and electric meters are designed to withstand winter weather conditions, but heavy or hard-packed snow and ice can present a safety hazard.
Accumulated snow can place unnecessary stress and strain on your gas meter piping which can increase the chance of a gas leak.
Blocked regulator vents, which allow your system to “breath”, can affect operation and interrupt service.
To avoid problems, follow some basic meter protection tips:
Meter Protection Tips:
Keep you meter clear of snow and ice.
Do not shovel snow up against your meter.
Take care in using a snow blower or plow near your meter.
NEVER kick or hit a meter to break away built-up snow or ice.
Remove icicles from overhangs.
Protect your meter from dripping water which could freeze.
If you find your meter or pressure regulator covered in frozen ice or snow, do not attempt to remove the ice or use de-icer, contact your Utility.
It is always a good idea to keep a clear path to your meter to avoid estimated meter readings. If you can’t get to your meter, the individual who reads your meter will not be able to either.
These helpful tips provided by Realgy Energy Services